JXSC LOGO light

Rock Manganese Ore Process Plant in Kenya

JXSC is proud to have provided a successful 50TPH manganese process plant in Kenya! We designed the manganese process plant flowchart and plant layout drawing according to the customer’s specific demands. Our experienced technicians and engineers are committed to ensuring your project runs smoothly from start to finish.

Location

Kenya, Africa

Material

Rock Manganese

Capacity

50 TPH

Feed Size

< 100mm

I have recently used JXSC's services to help design a 50TPH manganese process plant in Kenya. The process was efficient, and the team was very helpful in providing the necessary flowchart and plant layout drawings. They were knowledgeable and professional, and I would definitely recommend their services to others.
client
Samatta
Senior Manager

The manganese ore is rock type with clay,maximum input size 100mm, manganese concentrate size 0-25mm, the Mn grade in raw ore is around 18%, Fe2O3 accounts for 10% to 15%, SiO2 accounts for 25% to 35%. We should update the Mn grade for the client.

Wash and screen out bigger than +25mm materials to crush to smaller than 25mm , then use gravity separation method and magnetic separation method to remove Fe and Si from ore, so as to improve Mn grade to meet customer’s requirement.

We have designed the most effective beneficiation flowchart according to these ore conditions. The Mn grade meets customer’s requirements.

Solutions & Process

01

Washing & Screening

Wheel loader feeds raw ore to the hopper, through vibrating feeder evenly send ore to a belt conveyor, then to trommel scrubber for washing clay and screening out bigger than 25mm, 0-5mm, 5-25mm.

02

Crushing

Bigger than 25mm materials go to the jaw crusher to crush to a smaller size, then go to a vibrating screen for sieving out 0-5mm,5-25mm, and above 25mm which is back to the jaw crusher for re-crushing. For 5-25mm material, it will be sent to the jig machine for gravity separation out Mn concentrate by belt conveyor. For 0-5mm material, it will be sent to another jig for gravity separation out of Mn concentrate by a slurry pump.

03

Concentration​

-5mm and 5-25mm materials of trommel scrubber go to different jig machines for gravity separation out Mn concentrate.

The jig machine’s 0-5mm Mn concentrate is sent to a magnetic separator to remove impurities further.

04

Dehydration

The magnetic separator’s 0-5mm Mn concentrate goes to a dewatering screen for dehydration.

Wonderful! Share this Post:

Explore Our Projects

search Products

JXSC LOGO dark

Speak to Our Experts Today

Contact Us