JXSC LOGO light

Hammer Crushers

Large Crushing Ratio And One-time Molding

Our hammer crushers are crushing equipment that integrates primary crushing and shaping functions. Its crushing ratio is large, and it can be crushed and formed at one time, and the product has a good and uniform grain shape. It is often used as a crusher for aggregates, stones, minerals, garbage and other materials. The particle size of the finished product can be controlled by adjusting the gap size of the sieve plate. It is widely used in the crushing process stage of stone plants or mineral processing plants. JXSC supports customized mobile hammer crushers, combined with our high-resistant materials, improving crushing efficiency.

Brief Intro

Hammer crusher is suitable for crushing limestone, bluestone, marl, sandstone, shale, gypsum, coal and other raw materials with compressive strength less than 150MPa and calcium content higher than 40% with medium hardness. Among them, the compressive strength of the material is not more than 150 MPa, and the humidity is not more than 15%. It is often used as crushing equipment for stone crushing, stone crushing, mine crushing, plastic crushing, garbage crushing and other materials. In large-scale crushing production lines, it is often combined with heavy hammer crusher for medium or fine crushing.

Why Choose Our Hammer Crushers

Hammer crusher

Frame Structure

 

The frame connects all parts as a whole through bolts, welded with steel plates, and can also be made into a box structure.

 

Wear-resistant Hammer

 

Using high-strength hammer head, with super high hardness. The hammer head is forged with train wheels, and then processed by heat treatment, which improves the wear resistance and toughness, and has a long service life.

 

Spindle Material

 

The main shaft is the most important part of the hammer crusher supporting the rotor. The main shaft is made of high-quality alloy steel with high toughness and strength.

 

Unique Counterattack Board

 

The high manganese steel is cast and quenched and has been strengthened for better crushing effect and strong impact resistance.

 

Advantages

1. Large crushing ratio, high production efficiency, and complete models can meet the needs of most users.

2. The hammer crusher is an all-round equipment capable of coarse and fine crushing, and the product has uniform particle size.

3. In the later production process, the workload of repair and maintenance is less, more convenient and faster, and saves the user’s time.

4. The feed port of the hammer is large, suitable for various bulk materials, and the product particle size can also be adjusted according to demand.

5. The hammer plate is equipped with a wear-resistant sheath, and the stone will not directly wear with the rotor plate, which greatly improves the service life of the rotor.

6. The structure of the crushing cavity has good sealing performance, which solves the problems of dust pollution in the crushing space and dust leakage from the machine body.

7. The mobile hammer crusher can be customized to adapt to various crushing environments, with low energy consumption and high efficiency.

8. The equipment currently has a wide range of applications in the market, and the crushing of materials is highly targeted

Hammer Crushers Working Principle

The important working part is the rotor with hammer head. The ore is crushed along the fragile parts such as natural cracks and joint surfaces by using the high-speed rotating hammer head to strike, impact and grind. In the lower part of the rotor, there is a sieve plate, and the particle size of the crushed material smaller than the size of the sieve hole is discharged through the sieve plate. For materials with larger particle size, the granular materials that bounce back to the liner will be crushed by the additional impact of the hammer head. During the whole process of material crushing, the materials will also be crushed by mutual impact. Finally, it is discharged out of the machine through the sieve plate.

Hammer crusher

Specification

ModelSpeedFeed size(mm)Out-put size (mm)Capacity (t/h)Weight (T)Power (kw)
PC-400×3001450≤400-101-30.811
PC-600×4001000≤2200-155-251.522
PC-800×600980≤3500-1510-503.155
PC-800×800980≤3500-1510-603.575
PC-1000×8001000≤4000-1320-757.9115

Frequently Asked Questions

According to these aspects: raw material feeding size, required output size, material hardness.

12 Months for machine main parts, not include spare parts.

Generally 20 days, depends on the model.

Depending on different models and processing capacity. Here are some normal models and their corresponding input size,output size,capacity and power information for reference.

(1) The grease added to the bearing seat is 50-70% of the volume and must be replaced every three months.

(2) Abnormal sounds or violent vibration should be stopped for emergency treatment.

(3) Always pay attention to the fastening and tightness of each fastener.

(4) Check the condition of the screen regularly. If there is blockage, remove it immediately.

(5) Pay attention to the wear degree of easily worn parts, like the hammers,and replace worn parts in time.

Generally we use high manganese steel hammers.It’s with high wear resistance. Some clients also require a high chromium steel hammer to achieve higher hardness and better crushing effect.

There’s a screen inside the hammer crusher. Or we’ll make the grizzly bar inside it. Depending on client’s requirements about the screen and the output material size.

Mainly the hammers, screen, and bearing.

Explore Auxiliary Equipment

JXSC LOGO dark

Speak to Our Experts Today

Contact Us

    search Products